General information |
Product type designation | Front connector |
connection method / header |
Connection I/O signals |
• Connection method | Screw terminals |
• Number of lines per connection | 1; or combination of 2 conductors of up to 1.5 mm2 (total) in a shared ferrule |
Conductor cross-section in mm2 |
—Connectable cable cross-sections for massive cables, min. | 0.25 mm2 |
—Connectable cable cross-sections for massive cables, min. | 1.5 mm2 |
—Connectable cable cross-sections for flexible cables without end sleeve, min. | 0.25 mm2 |
—Connectable cable cross-sections for flexible cables without end sleeve, max. | 1.5 mm2 |
—Connectable cable cross-sections for flexible cables with end sleeve, min. | 0.25 mm2 |
—Connectable cable cross-sections for flexible cables with end sleeve, max. | 1.5 mm2 |
Conductor cross-section acc. to AWG |
—Connectable cable cross-sections for massive cables, min. | 24 |
—Connectable cable cross-sections for massive cables, min. | 16 |
—Connectable cable cross-sections for flexible cables without end sleeve, min. | 24 |
—Connectable cable cross-sections for flexible cables without end sleeve, max. | 16 |
—Connectable cable cross-sections for flexible cables with end sleeve, min. | 24 |
—Connectable cable cross-sections for flexible cables with end sleeve, max. | 16 |
Wire end processing |
—Stripped length of cables, min. | 10 mm |
—Stripped length of cables, max. | 11 mm |
—End sleeve acc. to DIN 46228 without plastic sleeve | Form A, 10 mm and 12 mm long |
—End sleeve acc. to DIN 46228 with plastic sleeve | Form E, 10 mm and 12 mm long |
Mounting |
—Tool | Screwdriver, conical design, 3 mm to 3.5 mm |
—Tightening torque, min. | 0.4 N-m |
—Tightening torque, max. | 0.7 N-m |