User-definable Modbus TCP Slave addressing Supports RESTful API for IIoT applications Supports EtherNet/IP Adapter 2-port Ethernet switch for daisy-chain topologies Saves time and wiring costs with peer-to-peer communications Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy mass deployment and configuration with ioSearch utility Friendly configuration via web browser Simplifies I/O management with MXIO library for Windows or Linux Class I Division 2, ATEX Zone 2 certification Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environmentsInput/Output Interface

Digital Input Channels		ioLogik E1210 Series: 16ioLogik E1212/E1213 Series: 8ioLogik E1214 Series: 6 ioLogik E1242 Series: 4
Digital Output Channels		ioLogik E1211 Series: 16ioLogik E1213 Series: 4
Configurable DIO Channels (by jumper)		ioLogik E1212 Series: 8ioLogik E1213/E1242 Series: 4
Relay Channels		ioLogik E1214 Series: 6
Analog Input Channels		ioLogik E1240 Series: 8ioLogik E1242 Series: 4
Analog Output Channels		ioLogik E1241 Series: 4
RTD Channels		ioLogik E1260 Series: 6
Thermocouple Channels	ioLogik E1262 Series: 8
Isolation	3kVDC or2kVrms
Buttons	Reset button

Digital Inputs

Connector	Screw-fastened Euroblock terminal
Sensor Type	Dry contactWet contact (NPN or PNP)
I/O Mode	DI or event counter
Dry Contact	On: short to GNDOff: open
Wet Contact (DI to COM)	On:10to 30 VDC Off:0to3VDC
Counter Frequency	250 Hz
Digital Filtering Time Interval	Software configurable
Points per COM	ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels

Digital Outputs

Connector	Screw-fastened Euroblock terminal
I/O Type	ioLogik E1211/E1212/E1242 Series: SinkioLogik E1213 Series: Source
I/O Mode	DO or pulse output
Current Rating	ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel
Pulse Output Frequency	500 Hz (max.)
Over-Current Protection	ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Over-Voltage Protection	35 VDC

Relays

Connector	Screw-fastened Euroblock terminal
Type	Form A (N.O.) power relay
I/O Mode	Relay or pulse output
Pulse Output Frequency	0.3 Hz at rated load (max.)
Contact Current Rating	Resistive load: 5A@30 VDC, 250 VAC,110 VAC
Contact Resistance	100 milli-ohms (max.)
Mechanical Endurance	5,000,000 operations
Electrical Endurance	100,000 operations @5A resistive load
Breakdown Voltage	500 VAC
Initial Insulation Resistance	1,000 mega-ohms (min.) @ 500 VDC
Note	Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

Physical Characteristics

Housing	Plastic
Dimensions	27.8 x124x84 mm (1.09 x 4.88 x 3.31 in)
Weight	200 g (0.44 lb)
Installation	DIN-rail mounting, Wall mounting
Wiring	I/O cable, 16to 26AWG Power cable, 12to24 AWG

Environmental Limits

Operating Temperature	Standard Models: -10 to 60°C (14to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	4000 m4

MOXA ioLogik E1200 Series  Available Models

Model Name	Input/Output Interface	Digital Output Type	OperatingTemp.
ioLogikE1210	16xDI	-	-10 to 60°C
ioLogikE1210-T	16xDI	-	-40 to 75°C
ioLogikE1211	16xDO	Sink	-10 to 60°C
ioLogikE1211-T	16xDO	Sink	-40 to 75°C
ioLogikE1212	8xDI,8xDIO	Sink	-10 to 60°C
ioLogikE1212-T	8 x DI, 8 x DIO	Sink	-40 to 75°C
ioLogikE1213	8 x DI, 4 x DO, 4 x DIO	Source	-10 to 60°C
ioLogikE1213-T	8 x DI, 4 x DO, 4 x DIO	Source	-40 to 75°C
ioLogikE1214	6x DI, 6x Relay	-	-10 to 60°C
ioLogikE1214-T	6x DI, 6x Relay	-	-40 to 75°C
ioLogikE1240	8xAI	-	-10 to 60°C
ioLogikE1240-T	8xAI	-	-40 to 75°C
ioLogikE1241	4xAO	-	-10 to 60°C
ioLogikE1241-T	4xAO	-	-40 to 75°C
ioLogikE1242	4DI,4xDIO,4xAI	Sink	-10 to 60°C
ioLogikE1242-T	4DI,4xDIO,4xAI	Sink	-40 to 75°C
ioLogikE1260	6xRTD	-	-10 to 60°C